The history of Farmall tractors originally dates back to the early part of the 1920’s when International Harvester began to develop their first prototype machine for cutting crops.  Orignially fairly odd in appearance, the front wheels were together and the rear wheels spaced as we would find today, making these early machines look a little like oversized tricycles.  Since then many different Farmall tractors have been designed for a whole range of jobs, here we take a look at a few of those.

The Farmall Cub is the smallest tractor in the International Harvester line, capable of pulling one 12-inch bottom plow. Production began in 1947 and continued relatively unchanged until 1964. Variations of the tractor (International Cub Lo-Boys) were continued for some time after that. The Cub was the only Farmall built with an L-head engine.

Farmall Cubs built in different years can be found with McCormick-Deering, Farmall, and International Harvester decals, depending upon the configuration of the parent company International Harvester in the year of production. For the purpose of this article, we will refer to the tractor as simply a "Farmall Cub".

This little tractor was aimed at the needs of the small-acreage farmer - farms of 40 crop acres or less and truck gardens, or for larger farms that needed an extra tractor. Seven or eight implements were initially designed for it: Plow, Disc, Backblade, Sickle-Bar Mower, Belly-Mower, and a one-armed front-end loader for starters. Like the Farmall Model A, the Cub was off-set to the left with the driver and steering wheel on the right. This concept was called "CultiVision" in reference to the ability of the driver to have a perfect view of a belly-mounted cultivator. In 1947, the Farmall Cub sold for around $545.00 - attachments and implements were extra.

The Farmall Cub was easily one of the most popular small chore tractors made in history. This is shown by the sheer numbers of Cubs that were built. People would not stop buying them! With a production run lasting almost 20 years, over 200,000 of them were built between 1947 and 1964.

Article Courtesy of YT Mag.

Classic Farmall Tractors: History, Models and Variations
From the first tractor built in 1924 to the last Farmall model to roll off the line, this richly illustrated history tells the full story of Farmall tractors and fills in a key chapter of American agricultural? history.

A Brief History of the Farmall Tractor
In 1923 American Farming would change forever.Enter the Farmall. The first Farmall Tractor produced by International Harvester (IH) was released only in Texas because the people in IH were not sure the tricycle type tractor would be.

The Farmall Cub Tractor
Built with an L-head engine, the Cub was the smallest tractor in the International Harvester Line. The 1947 base price was $545.00. The Farmall Cub was possibly the most popular small job tractors in history as shown by the quantity of.

Farmall Tractors F Series
The Letter series of Farmall tractors was produced until 1954, and was a defining product line in the history of International Harvester. 

Technorati Tags: 350, 450, a, c, cub, farmall, h, harvester, history, international, m, mccormick, mta, on, super, tractors

What is it about the old International Harvester machines that we still love so much today.  Some farmers will continue to use these machines until the day they stop working and then immediately look for a second hand farmall.  Farmall tractors are truly impressive machines. Whether you choose to buy a new or used one, a good choice of machinery has been made. There is nothing wrong with buying a used or second-hand tractor, providing you know exactly what you are looking for.

These days, as well as going to a reputable dealer or looking in the classified ads of your local newspaper, there are many tractors to be found on ebay. If you would, you can also find many used Farmall Tractors listed here.  The Farmall-A was introduced at a factory preview in Chicago many years ago and it is the International Harvester company that produces the smallest tractor in its thirty-one years of manufacturing.

This tractor has become so popular because of its all-purpose power unit with complete implement equipment available to farmers, making farming a lot easier even on small farms in the United States and around the world. This little machine will also do a lot of work on larger farms, supplementing larger tractors in lighter operations.

This tractor is available only with rubber tire equipment. The weight is approximately 1700 pounds, this is probably less weight from flywheels than on some earlier models. The Farmall-A has become an impressive tractor after seven years of development by the manufacturers so any farmer choosing to purchase one will no doubt have a fantastic and reliable machine.

The tractor was built to endure any type of work in farming regions of the United States and all over the world. It is suitable for working in hilly areas, corn fields and even cotton lands. It will withstand every type of possible condition that a tractor could be needed for.

The new Farmall-A has a lot of new features that will please many farmers. The most obvious one to the farmer would be the offset positions of the seat, engine and transmission train. To benefit the operator, the engine is offset nine inches to the right, while the seat is offset at the same distance to the right. Setting the seat and engine at these positions gives the operator an unusual area of vision.

Giving the operator this clearer vision helps greatly while doing row crop work; this is described as ‘Culti-Vision’. This can also help to offer a desirable balance whilst plowing, which is normally approximated by unequal weighting of wheels. This feature is claimed by many farmers to be of great value, especially to growers of cotton, corn, vegetables and many other crops planted in rows requiring cultivation.

The best tractor or machinery that any farmer can acquire to make life a little easier around the farm is greatly appreciated, as farming life is not only hard and difficult work, it is also year round work through every season. To have features like this on a tractor makes life a lot easier for the operator. To pick up a used Farmall tractor that was built when new additions were added is like finding gold. The seating itself is a luxury to the operator, no more sitting in cramped positions.

To buy a used Farmall tractor is a great choice as these are a superb piece of machinery with a choice of purchasing added implements to make farming life that much easier. Remember, when buying a tractor, that it has to last a long time, so make sure the body is in good condition, farmall tractor parts can always be purchased.

By: Mimilisan

Article Directory: http://www.articledashboard.com

——-
Irwan is an owner of Used Tractor Supply Site Visit his website to find john deere tractor, kubota tractor, farmall tractor, massey ferguson tractor, tractor information and other farming equipment guide.

Older Farmall Tractors are Good Value
First-time buyers of Farmalls can be enchanted by the myth and mystique, but you should check a few things before you buy a venerable H or Cub. Yes, they cost less than buying new, and they do the job.

The Farmall C Tractor
Serious antique collectors know about International Harvester’s Farmall tractors and the lasting impression they made on farmers across the US and abroad. One Farmall model that definitely made a mark on American farming history.

The Farmall M Tractor
Considered one of the most dependable tractors in farming history, International Harvester started production of this farm tractor in 1939. It released many variants over the 14 year production of this tractor, namely MD.

Farmall Tractors for Sale-Tips on Getting the Best Deal
Farmall tractors , especially Cub Farmall Tractor and the Farmall H Tractor have proven their worth as tough worker farm machines tested in many countries under all kinds of seasons. While tractors were primarily used in farms.

Farmall H tractors sighted in Lower Delaware!
The Delaware beaches and you keep your eyes pealed you’ll see a set of farmall H’s and Cubs in mint condition in an open shed right about 50 feet from the highway. It blew my mind to have such prized tractors right near the highway.

Farmall Tractors Are My Love
I love the Farmall. And own a piece of Americana. While driving up through Sussex County near the Delaware beaches recently, I spotted a lone Farmall Tractor, I think it was a venerable H, rusted and vine covered near a dilapidated soy.

Technorati Tags: 250, 450, a, c, cub, farmall, for, h, hand, harvester, international, m, mccormick, mta, sale, second, super, tractors, used

Finding parts for your Farmall H is easier than ever, with so many online stores offering a wide selection of parts for all Farmall tractors.  When I needed to buy a Farmall H Camshaft I found one within 10 minutes when searching just one online store and I was massively impressed with the huge range of parts on offer, whether looking for a camshaft for the H or a cylinder for the Cub there was definately something available.  To checkout the store please click here.

Farmall tractors are truly impressive machines. Whether you choose to buy a new or used one, a good choice of machinery has been made. There is nothing wrong with buying a used or second-hand tractor, providing you know exactly what you are looking for. These days, as well as going to a reputable dealer or looking in the classified ads of your local newspaper, there are many tractors to be found on eBay. 

The Farmall H was introduced at a factory preview in Chicago many years ago and it is the international harvester company that produces the smallest tractor in its thirty-one years of manufacturing. This tractor has become so popular because of its all-purpose power unit with complete implement equipment available to farmers, making farming a lot easier even on small farms in the United States and around the world. This little machine will also do a lot of work on larger farms, supplementing larger tractors in lighter operations.

This tractor is available only with rubber tire equipment. The weight is approximately 1700 pounds, this is probably less weight from flywheels than on some earlier models. The Farmall-H has become an impressive tractor after seven years of development by the manufacturers so any farmer choosing to purchase one will no doubt have a fantastic and reliable machine.

The tractor was built to endure any type of work in farming regions of the United States and all over the world. It is suitable for working in hilly areas, corn fields and even cotton lands. It will withstand every type of possible condition that a tractor could be needed for.

The new Farmall-H has a lot of new features that will please many farmers. The most obvious one to the farmer would be the offset positions of the seat, engine and transmission train. To benefit the operator, the engine is offset nine inches to the right, while the seat is offset at the same distance to the right. Setting the seat and engine at these positions gives the operator an unusual area of vision.

Giving the operator this clearer vision helps greatly while doing row crop work; this is described as "Culti-Vision". This can also help to offer a desirable balance whilst plowing, which is normally approximated by unequal weighting of wheels. This feature is claimed by many farmers to be of great value, especially to growers of cotton, corn, vegetables and many other crops planted in rows requiring cultivation.

The best tractor or machinery that any farmer can acquire to make life a little easier around the farm is greatly appreciated, as farming life is not only hard and difficult work, it is also year round work through every season. To have features like this on a tractor makes life a lot easier for the operator. To pick up a used Farmall tractor that was built when new additions were added is like finding gold. The seating itself is a luxury to the operator, no more sitting in cramped positions.

To buy a used Farmall tractor is a great choice as these are a superb piece of machinery with a choice of purchasing added implements to make farming life that much easier. Remember, when buying a tractor, that it has to last a long time, so make sure the body is in good condition, spare parts can always be purchased.

Author: Irwan H Nuswanto

Irwan is an owner of Used Tractor Supply Site Visit his website to find john deere tractor, kubota tractor, farmall tractor, massey ferguson tractor, tractor information and other farming equipment guide

Article Source: http://EzineArticles.com/?expert=Irwan_H_Nuswanto

Farmall H Tractor Parts
If you’re wondering where to find farmall tractor parts for use on your machine then look no further.  Here you can find the biggest selection of parts and tractors available at reasonable prices and for all models.  I found a camshaft for my Farmall H.

Finding Farmall Tractor Parts
The last Farmall of any kind rolled off the assembly line in 1975, and the 5000000 th Farmall was the end of an era. But folks like us, who see them against a field of golden grain and blue sky remember why the Red Farmall was symbolic.

Lawn tractor parts and Garden tractor parts.
And to maintain it, you need a Good Lawn and garden tractor parts. You can get it according to your needs and interest. There are lots of Lawn and Garden tractor part manufacturers these days, So No Worries.